Home > Products > Legacy Scientific Atlanta > Transmission
Choose a sub category:
RF Electronics 750MHz RF Electronics 870MHz
Sort By:
Page of 1
GainMaker Express Line Extender 870MHz

The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today’s broadband networks. All GainMaker amplifiers provide superior 2-way performance and reliability combined with a user-friendly layout. All share common plug-in accessories and perform to 870 MHz in the forward path. The Line Extenders in this family provide a single forward RF output port while the System Amplifiers provide multiple forward RF output ports.

The GainMaker Line Extender modules have increased gain and are mechanically compatible with previous Line Extender II and III housing bases, often enabling upgrade to higher bandwidth with no re-spacing or re-splicing. The DC power supply is modular and located in an updated housing lid for easy access. All GainMaker Line Extender modules are factory configured with reverse amplifier, diplex filters, forward interstage pads and interstage equalizer, to ensure optimal performance. For output level control over temperature, the Express configuration includes single-pilot Automatic Gain Control (AGC).

The GainMaker Express Line Extender has a single forward RF output port and is ideally suited for providing lower RF levels in the Express (trunk) network.

GainMaker High Gain Balanced Triple System Amplifier

The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today's broadband networks. All GainMaker amplifiers provide superior 2-way performance and reliability combined with a user-friendly layout. All share common plug-in accessories and perform to 870 MHz in the forward path. The Sytem Amplifiers in this family provide multiple forward RF output ports while the Line Extenders provide a single forward RF output port.
The GainMaker System Amplifier modules have increased gain and are mechanically compatible with previous System Amplier II, II+ and III housing bases, often enabling upgrade to higher bandwidth with no re-spacing or re-splicing. The DC power supply is modular and located in an updated housing lid for easy access. All GainMaker System Amplifier modules are factory configured with reverse amplifier, diplex filters, thermal compensation circuit, forward interstage pads and equalizer, to ensure optimal performance. Optional single-pilot Automatic Gain Control (AGC) configurations are also available.
The GainMaker High Gain Balanced Triple System Amplifier has three forward outputs and is ideally suited for providing high (bridger) level RF to the feeder network.

GainMaker High Gain Balanced Dual System Amplifier

The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today’s broadband networks. All GainMaker amplifiers provide superior 2-way performance and reliability combined with a user-friendly layout. All share common plug-in accessories and perform to 870 MHz in the forward path. The System Amplifiers in this family provide multiple forward RF output ports while the Line Extenders provide a single forward RF output port.

GainMaker System Amplifiers now utilize GaAsFET technology in the interstage and output gain stages for improved distortion performance.

The GainMaker System Amplifier modules have increased gain and are mechanically compatible with previous System Amplifier II, II+, and III housing bases, often enabling upgrade to higher bandwidth with no re-spacing or re-splicing. The DC power supply is modular and located in an updated housing lid for easy access. All GainMaker System Amplifier modules are factory configured with reverse amplifier, diplex filters, thermal compensation circuit, forward interstage pads, and equalizer to ensure optimal performance. Optional single-pilot Automatic Gain Control (AGC) configurations are also available.

The GainMaker High Gain Dual System Amplifier is ideally suited for providing high (bridger) level RF to the feeder network. It provides two forward RF outputs (Main and Auxiliary), with the option to create a third RF output via use of an optional plug-in Auxiliary path signal director.

GainMaker Low Gain Balanced Dual System Amplifier

The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today’s broadband networks. All GainMaker amplifiers provide superior 2-way performance and reliability combined with a user-friendly layout. All share common plug-in accessories and performs to 870 MHz in the forward path. The System Amplifiers in this family provide multiple forward RF output ports while the Line Extenders provide a single forward RF output port.

The GainMaker System Amplifier modules have increased gain and are mechanically compatible with previous System Amplifier II, II+ and III housing bases, often enabling upgrade to higher bandwidth with no re-spacing or re-splicing. The DC power supply is modular and located in an updated housing lid for easy access. All GainMaker System Amplifier modules are factory configured with reverse amplifier, diplex filters, thermal compensation circuit, forward interstage pads and equalizer, to ensure optimal performance. Optional single-pilot Automatic gain Control (AGC) configurations are also available.

The GainMaker Low Gain Dual System Amplifier is ideally suited for providing high (bridger) level RF to the feeder network. It provides two forward RF outputs (Main and Auxiliary), with the option to create a third RF output via the use of an optional plug-in Auxiliary path signal director.

GainMaker Unbalanced Triple System Amplifier

The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today’s broadband networks. All GainMaker amplifiers provide superior 2-way performance and reliability combined with a user-friendly layout. All share common plug-in accessories and performs to 870 MHz in the forward path. The System Amplifiers in this family provide multiple forward RF output ports while the Line Extenders provide a single forward RF output port.

The GainMaker System Amplifier modules have increased gain and are mechanically compatible with previous System Amplifier II, II+ and III housing bases, often enabling upgrade to higher bandwidth with no re-spacing or re-splicing. The DC power supply is modular and located in an updated housing lid for easy access. All GainMaker System Amplifier modules are factory configured with reverse amplifier, diplex filters, thermal compensation circuit, forward interstage pads and equalizer, to ensure optimal performance. Optional single-pilot Automatic gain Control (AGC) configurations are also available.

The GainMaker Unbalanced Triple System Amplifier is ideally suited as a trunk/bridger amplifier. The Unbalanced Triple provides one low level RF output for the trunk (express) path and two high (bridger) level RF outputs for the feeder network.

GainMaker High Gain Balanced Triple System Amplifier

The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today’s broadband networks. All GainMaker amplifiers provide superior 2-way performance and reliability combined with a user-friendly layout. All share common plug-in accessories and perform to 870 MHz in the forward path. The System Amplifiers in this family provide multiple forward RF output ports while the Line Extenders provide a single forward RF output port.

GainMaker System Amplifiers now utilize GaAsFET technology in the interstage and output gain stages for improved distortion performance.

The GainMaker System Amplifier modules have increased gain and are mechanically compatible with previous System Amplifier II, II+, and III housing bases, often enabling upgrade to higher bandwidth with no re-spacing or re-splicing. The DC power supply is modular and located in an updated housing lid for easy access. All GainMaker System Amplifier modules are factory configured with reverse amplifier, diplex filters, thermal compensation circuit, forward interstage pads, and equalizer to ensure optimal performance. Optional single-pilot Automatic Gain Control (AGC) configurations are also available.

The GainMaker High Gain Balanced Triple System Amplifier has three forward outputs and is ideally suited for providing high (bridger) level RF to the feeder network.

System Amplifier III 750 MHz with 40/51 MHz Split High Gain Dual

The System Amplifier III family of RF amplifiers includes a variety of gain, output, and frequency configurations to optimally address the various network architectures being deployed. Additionally, these amplifiers incorporate several features to increase current passing capability by as much as 50 percent and tolerance to high current surges is greatly improved. This results in significant cost reductions in repair and replacement of amplifiers damaged by electrical surges. The high current housings and amplifier modules are indicated by blue insulators on the module “F” connectors and housing seizure connectors.

The System Amplifier III product line also incorporates a metal cover which improves the performance of the station. This family of amplifiers has been designed to afford maximum flexibility and upgradability to enable low-cost delivery of basic broadcast video, data, and voice services. Reliability and maintain-ability are also at the core of the designs to ensure maximum network availability.

The High Gain Dual output module is a valuable member of the System Amplifier III product line.
Providing two high level outputs (with the capability to split one to feed a third port) the High Gain Dual is primarily utilized in advanced Fiber to the Serving Area (FSATM) architectures functioning as a tap amplifier. With an extra amplification stage, it is also very useful in long-reach applications, or as a terminating bridger in more traditional architectures.

System Amplifier III 750 MHz with 40/52 MHz Split Low Gain Dual

The System Amplifier III (SAIII) family of RF amplifiers includes a variety of gain, output, and frequency configurations to optimally address the various network architectures being deployed. All SAIII amplifier modules offer 15 amp current carrying capacity, and come preconfigured with diplexers and reverse amplifier for optimum reverse performance.

The SAIII product line also incorporates a metal module cover which improves the RF performance of the station.

The Low Gain Dual provides two high level outputs (with the capability to split one to feed a third port) and is primarily utilized in advanced Fiber-to-the-Serving Area (FSA) architectures functioning as an express or tap amplifier. It can also be deployed as a terminating bridger in more traditional architectures.

System Amplifier III 750 MHz with 40/52 MHz Split Unbalanced Triple

The System Amplifier III (SAIII) family of RF amplifiers includes a variety of gain, output and frequency configurations to optimally address the various network architectures being deployed. All SAIII amplifier modules offer 15 amp current carrying capacity, and come preconfigured with diplexers and reverse amplifier for optimum reverse performance.

The SAIII Unbalanced Triple - RC (Reverse Conditioning) amplifier module incorporates all of the features of the SAII+ Unbalanced Triple. Additionally, maximum flexibility in reverse signal path alignment is achieved via the incorporation of individual reverse input testpoints and pads for each of the reverse inputs.

The Unbalanced Triple - RC amplifier module can be field configured with a variety of standard accessory options to meet specific requirements.

Line Extender III GaAs Fet 750MHz with 40/51 Split

The Line Extender III (LE III) family of RF amplifiers provide optimum performance and reliability for broadband network applications. All LE III amplifier modules offer fifteen amp current carrying capacity, and are pre-configured with diplexers and reverse amplifier for optimum reverse performance.

The LE III GaAs FET amplifier module incorporates robust GaAs FET gain block technology, which provides significant improvements in distortion performance.

LE III can be field configured with a variety of options to meet specific requirements.

For applications where output level control is not required, the interstage is typically configured with a stand alone Interstage Equalizer (ISEQ).

For basic output level control in aerial plant applications, a combination Thermal Compensator/ISEQ is available.

For the most accurate degree of output level control in both aerial and underground plant, a combination AGC/ ISEQ is the desired option. The LE III GaAs FET amplifier module provides one (bridger level) output.

Line Extender III PHD750MHz with 40/52 Split

The Line Extender III (LEIII) family of RF amplifiers provide optimum performance and reliability for broadband network applications. All LEIII amplifier modules offer fifteen amp current carrying capacity, and are pre-configured with diplexers and reverse amplifier for optimum reverse performance.

The LEIII PHD amplifier module can be field configured with a variety of options to meet specific requirements.

For applications where output level control is not required, the interstage is typically configured with a stand alone Interstage Equalizer (ISEQ). For basic output level control in aerial plant applications, a combination Thermal Compensator/ ISEQ is available.

For the most accurate degree of output level control in both aerial and underground plant, a combination AGC/ ISEQ is the desired option.

The LEIII PHD amplifier module provides one (bridger level) output.