Home > Products > Pico Digital > Amplifiers
Sort By:
Page of 1
CA-30/1000: 1 GHZ BROADBAND PUSH-PULL DISTRIBUTION AMPLIFIER

The Pico Macom CA-30/1000 is a high-quality push-pull, wall-mounted distribution amplifier that produces signals with extremely low-noise and harmonic distortion. The amplifier is capable of broadband 158-channel operation over the 54-MHz to 1000-MHz range. This amplifier makes an excellent distribution system amplifier for heavily loaded MDU and broadband CATV and SMATV systems. Because of its extremely low-noise figure and low distortion, the CA-30/1000 is ideally suited for use in larger networks where amplifier cascading is required. In expanding bi-directional broadband systems, the CA-30/1000 can be used in conjunction with Tru-Spec Sub CATV diplexers to split forward and reverse paths. Alternately, Pico Macom's PIDA series of bi-directional amplifiers may be used.

CA-30/550: 550 MHZ PUSH-PULL DISTRIBUTION AMPLIFIER

The Pico Macom CA-30/550 is a high-quality push-pull, wall-mounted distribution amplifier that produces signals with extremely low-noise and harmonic distortion. This amplifier is capable of 82-channel operation over the 54-MHz to 550-MHz range, and makes an excellent distribution system amplifier in MDU, CATV, and SMATV systems. Because of its extremely low-noise figure and low distortion, the CA-30/550 is ideally suited for use in larger networks where amplifier cascading is required. In expanding bi-directional broadband systems, Pico Macom's PIDA series bi-directional amplifiers should be used.

CA-30/870AR: 870 MHZ BIDIRECTIONAL CATV DISTRIBUTION AMPLIFIER

The CA-30/870AR distribution amplifier is a high quality push-pull amplifier that produces signals with extremely low distortion and harmonic content. The forward bandwidth makes 135-channel operation possible, while the two-way configuration allows the amplifier to be used in systems that utilize remote signal sources on the return path.

CA-30RK1000: 1GHZ BROADBAND PUSH-PULL HEADEND AMPLIFIER

    • 158 Channel frequency range 54~1000MHz (CATV 2~13! A1~A5, A~ZZZ, 89~158, UHF 14~69) (CA-30RK10000)
    • 30dB Gain for optimal carrier to noise ratio and superior picture quality
    • ±0.5dB Flatness across band provides low distortion and excellent frequency response
    • Front panel controls and test point enable easy setup and monitoring
    • Built-in lightning and line voltage surge protection protects the unit from damage
    • Low noise performance, eliminating addition of offending picture static

CA-30RK550: 550MHZ PUSH-PULL HEADEND AMPLIFIER

  • 82 Channel frequency range 54~550MHz (CATV 2~13! A1~A5, A~PPP) (CA-30RK550)
  • 30dB Gain for optimal carrier to noise ratio and superior picture quality
  • ±0.5dB Flatness across band provides low distortion and excellent frequency response
  • Front panel controls and test point enable easy setup and monitoring
  • Built-in lightning and line voltage surge protection protects the unit from damage
  • Low noise performance, eliminating addition of offending picture static

CA-45RK550: 550MHZ PUSH-PULL HEADEND AMPLIFIER

  • 45dB Gain for optimal carrier to noise ratio and superior picture quality
  • 82 Channel frequency range 54~550MHz (CATV 2~13! A1~A5, A~PPP)
  • ±0.5dB Flatness across band provides low distortion and excellent frequency response
  • Front panel controls and test point enable easy setup and monitoring
  • Built-in lightning and line voltage surge protection protects the unit from damage
  • Low noise performance, eliminating addition of offending picture static

CA-50/550: 550MHZ HIGH-GAIN DISTRIBUTION AMPLIFIER

  • 54-550MHz frequency range (CATV 2~PPP)
  • 50dB gain designed for low input applications to provide optimum carrier to noise performance
  • ±0.75dB flatness per 100MHz provides low distortion and excellent frequency response
  • Employs state-of-the-art hybrid push-pull technology for distortion-free audio-video quality
  • Adjustable slope and gain controls for easy system balancing
  • Easy-access controls and low-loss (-20dB) test point enable simplified setup and performance monitoring
  • Built-in lightning and line voltage surge protection protects the unit from damage

CDA-1A: 1GHZ CATV DROP BI-DIRECTIONAL AMPLIFIERS

  • Forward bandwidth 54 to 1000MHz allows use in large broadband systems. Reverse bandwidth 5 to 42MHz allows interactive revenue generating services
  • Ultra low 3dB noise figure provides clean distribution! reducing digital artifacts in digital signals, and provides clearer analog pictures
  • 6kV surge protected on all ports to protect consumer equipment from transient voltages and line surges
  • Output or independent power "F" port capability provides powerful flexibility option for local or remote powering
  • External UL approved power supply for domestic and international use

CDA-1P: 1GHZ CATV DROP BI-DIRECTIONAL AMPLIFIERS

  • Forward bandwidth 54 to 1000MHz allows use in large broadband systems. Reverse bandwidth 5 to 42MHz allows interactive revenue generating services
  • Ultra low 3dB noise figure provides clean distribution! reducing digital artifacts in digital signals, and provides clearer analog pictures
  • 6kV surge protected on all ports to protect consumer equipment from transient voltages and line surges
  • Output or independent power "F" port capability provides powerful flexibility option for local or remote powering
  • External UL approved power supply for domestic and international use

CDA-2A: 1GHZ CATV DROP BI-DIRECTIONAL AMPLIFIERS

  • Forward bandwidth 54 to 1000MHz allows use in large broadband systems. Reverse bandwidth 5 to 42MHz allows interactive revenue generating services
  • Ultra low 3dB noise figure provides clean distribution! reducing digital artifacts in digital signals, and provides clearer analog pictures
  • 6kV surge protected on all ports to protect consumer equipment from transient voltages and line surges
  • Output or independent power "F" port capability provides powerful flexibility option for local or remote powering
  • External UL approved power supply for domestic and international use

L860: BI-DIRECTIONAL LAUNCH AMPLIFIER

  • Broadband 54-1000MHz forward bandwidth! 5-36MHz active reverse path
  • 30dB typical forward-path gain for optimum performance to overcome combining losses and provide ample level for distribution
  • 20dB active reverse-path gain for extra level to distribute reverse path signals to CMTS and other upstream applications
  • Adjustable gain and slope controls to optimize carrier-to-noise ratio and provide superior picture quality and easy system balancing
  • Plug-in equalizers and attenuators (included) enable uniform gain and slope system balancing for minimum distortion
  • Employs dual state-of-the-art push-pull hybrid technology for very low distortion, high input and output capability
  • -20dB input and output test points enable simplified setup and performance monitoring without service interruption
  • Built-in lightning and line-voltage surge protection safeguards the unit from damage

LA-2150A: SATELLITE IF INLINE AMPLIFIERS

  • High-grade satellite IF inline amplifiers suitable for DBS or MMDS applications
  • Available in 950~2150MHz for satellite only applications! or 40~2150MHz for satellite and terrestrial applications
  • 16~20dB Sloped versions compensate for loss on long cable runs
  • DC Pass-thru current 500mA maximum for LNB powering
  • Output level 45dBmV maximum
  • High performance SMD board circuitry
  • Soldered back-cover plate ensures high isolation >120dB
  • Nickel plated zinc-alloy diecast housing

LA-2150B: SATELLITE IF INLINE AMPLIFIERS

  • High-grade satellite IF inline amplifiers suitable for DBS or MMDS applications
  • Available in 950~2150MHz for satellite only applications! or 40~2150MHz for satellite and terrestrial applications
  • 16~20dB Sloped versions compensate for loss on long cable runs
  • DC Pass-thru current 500mA maximum for LNB powering
  • Output level 45dBmV maximum
  • High performance SMD board circuitry
  • Soldered back-cover plate ensures high isolation >120dB
  • Nickel plated zinc-alloy diecast housing

LA-2150D: SATELLITE IF INLINE AMPLIFIERS

  • High-grade satellite IF inline amplifiers suitable for DBS or MMDS applications
  • Available in 950~2150MHz for satellite only applications! or 40~2150MHz for satellite and terrestrial applications
  • 16~20dB Sloped versions compensate for loss on long cable runs
  • DC Pass-thru current 500mA maximum for LNB powering
  • Output level 45dBmV maximum
  • High performance SMD board circuitry
  • Soldered back-cover plate ensures high isolation >120dB
  • Nickel plated zinc-alloy diecast housing

MPA-HD: MAST-MOUNTED HDTV PRE-AMPLIFIER

  • Digital signal optimized mast-mounted pre-amplifier
  • 68 Off-air channel range (54~108MHz! 174~216MHz, 470~806MHz) suitable for small to large MATV-SMATV systems
  • 2dB sloped-output across band provides low harmonic distortion
  • Incorporated 75Ω F-type input and output interface, providing optimum connection
  • 6kV Lighting surge protected
  • Weather-protected connections
  • Mounting hardware included
  • External 117VAC 60Hz 5W power source
  • UL Approved

PIDA-1000: BROADBAND BI-DIRECTIONAL PUSH-PULL DISTRIBUTION AMPLIFIERS

  • 54~1000MHz (CATV 2~158) and 5~42MHz reverse bandwidth (CATV T7~T11)
  • 30dB forward path gain and 20dB or passive reverse path gain (switchable) for maximum flexibility
  • ±0.75dB flatness across band provides low distortion and excellent frequency response
  • Employs dual state-of-the art push-pull hybrid technology for very low distortion! high input and output capability
  • Optional plug-in equalizers and attenuators enable unity gain and slope system balancing for minimum distortion
  • -30dB input and output test points enable simplified setup and performance monitoring without service interruption
  • Built-in lightning and line-voltage surge protection protects the unit from damage
  • External UL approved power supply

TA-25: 18-25DB SLOPED UHF/VHF/FM DIST AMPLIFIER

  • Cost-effective wide-frequency bandwidth amplifier
  • 68 Off-air channel range (54~108MHz) suitable for small to large MATV-SMATV systems
  • 7db Sloped-output across band provides low harmonic distortion
  • -20db FM trap switch (88~108MHz) filters high level local FM radio stations reducing harmonic distortion
  • Heave gauge rugged shielded wall-mount case
  • Convenient and compact design allows quik and easy installation
  • Front Panel LED Power Indicator

TA-36: 31-36DB ADJUSTABLE UHF/VHF/FM DISTRIBUTION AMPLIFIER

  • Cost-effective wide-frequency bandwidth amplifier
  • 68 Off-air channel range (54~108MHz! 174~216MHz, 470~806MHz) suitable for small to large MATV-SMATV systems
  • 5dB Sloped-output across band provides low harmonic distortion
  • 15dB Independently adjustable band-gain controls for optimal carrier to noise ratio and balancing
  • Dual -20dB FM trap switches (88~108MHz) effectively filter high level local FM radio stations reducing harmonic distortion
  • Heavy gauge rugged shielded wall-mount case
  • Convenient and compact design allows quick and easy installation
  • Front panel LED power indicator and fuse holder