Home > PRODUCTS > Quintech
Choose a sub category:
Amplifiers Splitters & Combiners
Quintech Electronics and Communications Inc. was founded in 1989 and incorporated that same year in Indiana, Pennsylvania. The company is a state-of-the-art designer and manufacturer of RF signal management communications equipment and globally distributed. Its products are vital and necessary for RF signal management and are the keystones to the automation of today's advanced telecommunication network infrastructures and test laboratories. Our worldwide customers includesatellite, government, wireless telecommunications, broadcast and CATV service and equipment providers. Quintech produces RF matrix switches, RF over fiber, routers, redundancy switches, relay switches, splitters, combiners, amplifiers, frequency converters and DC powering products. The products are available in wireless, L-band, IF, and broadband frequencies. These RF signal management products are used for test and measurement, monitor and control, signal replication, backup and protection, and legal surveillance. Designed for high reliability and maximized uptime, the company has products in active service for over 25 years. Quintech has historically emphasized the design and development of customer driven RF signal management solutions in order to provide the best possible result for our customers.
Sort By:
Page of 1
LS2150 (Active) LS 2150 (Passive) Series LS2150 (Active) LS 2150 (Passive) Series

The LS 2150 series of passive L-band (950-2150 MHz) splitters permit simple splitting of RF signals to multiple destinations. Configurations available from 2 to 64 ports, including dual and quad units. A variety of powering options and features are available. The passive splitters are power passing on port 1.

The LS 2150 series of active (unity gain or zero loss) L-band (950- 2150 MHz) splitters permit simple splitting of RF signals to multiple destinations. Configurations available from 2 to 64 ports, including dual and quad units. A variety of powering options and features are available. Active units will power LNBs. The active splitters are DC blocked on all outputs.

LSC 1000P Passive Broadband Splitters LSC 1000P Passive Broadband Splitters

The LSC 1000P Series are commercial quality passive broadband RF power splitters / combiners that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. They operate over the 5-1000 MHz frequency range and enable the splitting or combining of RF signals with repeatable performance over the entire frequency range and across all I/O ports. The LSC 1000P Series are commercial quality passive broadband RF power splitters / RF power combiners that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. They operate over the 5-1000 MHz frequency range and enable the splitting or combining of RF signals with repeatable performance over the entire frequency range and across all I/O ports

LC 1000A Series LC 1000A Series

The LC 1000A series is a commercial quality line of (5-1000 MHz) broadband RF combiner that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. “Zero” loss and custom configurations available.

LS 1000A Active Broadband Splitter LS 1000A Active Broadband Splitter

The LS series is a commercial quality line of (5-1000 MHz) broadband RF splitters that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. “Zero” loss and custom configurations available.

RF Power Combiners: LC 2150A Series RF Power Combiners: LC 2150A Series

The LC 2150A series commercial quality active L-band combiners meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. These unity gain combiners operate over the Satellite L-band (950-2150 MHz) frequency range and enable the combining of RF signals with repeatable performance over the entire frequency range and across all I/O ports.

Versatile Chassis for up to 16 Modules: DEV 2190 Versatile Chassis for up to 16 Modules: DEV 2190

The DEV 2190 is a versatile 4 RU Chassis housing up to 16 modules. It allows the user to combine a variety of signal distribution and combining options including IRD controlled and matrix switch options. Amplifier modules with variable gain and tilt; a monitoring output; RF sensing; and LNB power with current monitoring are available. Redundant amplifiers allow for “No single point of failure”. This chassis includes power line and power supply redundancy along with SNMP support and a web interface with signal recording and data backup.

DEV 2304 4-way Active Combiner DEV 2304 4-way Active Combiner

The DEV 2304 is a commercial quality 4-way active combiner. It operates over the CATV-Band frequency range of (47 MHz - 862 MHz). The unit features dual, redundant, adjustable amplifiers with monitoring and alarm functions in addition to gain and slope adjustments. The monitoring port is located on the front of the chassis. Redundant power supplies are included for added reliability.

DEV 2316 16-way Active Combiner DEV 2316 16-way Active Combiner

The DEV 2316 is a commercial quality 16-way active combiner. It operates over the CATV-Band frequency range of (47 MHz - 862 MHz). The unit features dual, redundant, adjustable amplifiers with monitoring and alarm functions in addition to gain and slope adjustments. The monitoring port is located on the front of the chassis. Redundant power supplies are included for added reliability.

DEV 2182 -50/75 8-way Active Splitter DEV 2182 -50/75 8-way Active Splitter

The DEV 2182 – 50-75 is a commercial quality 8-way active splitter. It operates over the L-Band frequency range of (950 MHz - 2150 MHz). This unit has 50 ophm SMA connectors at the input and 75 ohm F type connectors on the outputs. It comes with redundant power supplies and a monitoring output port. The LNB power supply has current monitoring with adjustable thresholds and alarm output. RF sensing is available with adjustable threshold and alarm output.

DEV 2182 -75/50 8-way Active Splitter DEV 2182 -75/50 8-way Active Splitter

The DEV 2182 – 75/50 is a commercial quality 8-way active splitter. It operates over the L-Band frequency range of (950 MHz - 2150 MHz). This unit has 75 ohm F connectors on the inputs and 50 ohm SMA connectors at the output. It comes with redundant power supplies and a monitoring output port. The LNB power supply has current monitoring with adjustable thresholds and alarm output. RF sensing is available with adjustable threshold and alarm output.

AMP 2150 L-Band RF Line Amp AMP 2150 L-Band RF Line Amp

The AMP 2150 series of L-band line amplifiers provide high gain as well as optional DC path continuity. These amplifiers are manufactured utilizing highly reliable surface mount technology and advanced micro- strip RF circuitry and are typically deployed for multiple receiver installations in satellite telecommunication networks to compensate for L-band signal paths through long coaxial cable runs. Housed in either a standard 1 RU rack mount enclosure or rugged weatherproof extruded housing, the AMP 2150 Series amplifiers are the optimum choice for any L-band satellite communications application.