Home > PRODUCTS > Unipower > AC/DC Power System Additions
Sort By:
Page of 1
1U DC DISTRIBUTION PANEL WITH FIELD INSTALLED BREAKERS – DPP1U SERIES 1U DC DISTRIBUTION PANEL WITH FIELD INSTALLED BREAKERS – DPP1U SERIES

The 1u dc distribution panels are only 1.75 inches high and provide up to 16 breakers single-bus 150A or dual-bus 300A (8A/8B) distribution and alarm capabilities.

The A and B sections of the dual-bus 1u dc distribution panel are fully isolated, can be separately configured for 12 or 24/48 volts and are polarity neutral.

Breaker capacities range from 1 to 30 amperes. Breaker alarm is indicated by a dual color LED (green/red) and Form C relay contacts for each bus.

Features & Options
48/24V and 12V or Dual Voltage
POLARITY NEUTRAL
150A bus bar inputs
Single or Dual Feed
NO tools required to change breakers
Tapered entry for easy insertion
NO or NC alarm contacts
Alarm LEDs
Power Fail form-C alarm
19" & 23" universal mounting brackets
Rear panel safety cover standard

2U DC DISTRIBUTION PANEL WITH FIELD INSTALLED BREAKERS – DPP2U SERIES 2U DC DISTRIBUTION PANEL WITH FIELD INSTALLED BREAKERS – DPP2U SERIES

The 2u dc distribution panels are only two mounting positions (3.5 inches) high. Standard models provide up to 20 breakers dual-bus 900A (10A/10B) distribution and alarm capabilities.

The A and B sections of the dual-bus 2u dc distribution panels are fully isolated, can be separately configured for 12 or 24/48 volts and are polarity neutral. Breaker capacities range from 2.5 to 200 amperes. Optional single-bus 450A models are also available. Breaker and power fail alarms are indicated by a dual color LED green/red) and Form C relay contacts for each bus. Rear accessed load cables connect via 2-hole anti-rotation posts. All connections are straight on for easy installation.

DPP2U Series 2U dc distribution panels meet the requirements of NEBS GB-1098-CORE and GR-63-CORE.

Features & Options
48/24V and 12V or Dual Voltage
POLARITY NEUTRAL
450A bus bar inputs (900A total)
Dual Feed (optional Single Feed)
“Mid-Trip” circuit breaker function
Circuit Breaker ‘puller’ included
Tapered entry for easy insertion
NO or NC alarm contacts
Alarm LEDs
Power Fail form-C alarm
19" & 23" universal mounting brackets
Rear panel safety cover standard

1.5KVA INVERTER – SLI15 SERIES 1.5KVA INVERTER – SLI15 SERIES

The SLI15 1.5kVA Inverter Series offers four models for different input (24 and 48 VDC) and output (115 and 230 VAC) voltage combinations. An integrated controller, along with an optional internal Static Transfer Switch (STS) enable flexible and scalable systems which are truly “plug and play”, and require no external subsystems. The inverters can be stacked up to the power level needed by each application up to a maximum of 6 units and also have the capability to be configured for generating a 3-phase voltage source.

Electrical performance of the SLI15 1.5kVA Inverter is exemplary of a top-of-the-market product with efficiency that peaks at 93% and a patent-pending control algorithm that compensates current harmonics on the DC side without using bulky and expensive filters. The SLI15 1.5kVA Inverter includes a powerful on-board Digital Signal Processor (DSP) that allows easy programming of main parameters through use of its front-panel keypad and LCD display. In addition, the SLI 15 can be interfaced with an RS-485 serial communications link.

Features & Options
24V or 48VDC Input
115VAC or 230VAC Output
New, compact design: 1U height x 19” width x 14.94” depth; 19” rack-mountable
High efficiency: up to 93%
True sine wave output
Parallelable output with current share and synchronization of up to 6 inverters working in parallel
Front panel LCD display to monitor and set the main parameters
RS-485 serial link
Constant input current sink from battery for extended life
Optional hot-swappable configuration
Optional internal Static Transfer Switch
In the -STS version, ON line (primary source to the load) or OFF line mode (UPS like)
Configurable for being used as Three Phase source, 3 units

5KVA INVERTER – SLI50 SERIES 5KVA INVERTER – SLI50 SERIES

The SLI50 Series 5kVA inverter provide an ideal solution for telecom, IT and industrial applications. Due to innovative technology solutions like the patent-pending “Compact Coil”, the SLI50 Series 5kVA inverter packs 5000 watts of power into a compact package that is 19” rack mountable and only two rack units high.

Electrical performance of the SLI50 Series 5kVA inverter is at the top of the market with efficiency that peaks at 3% and a patent-pending control algorithm that compensates current harmonics on the DC side without using bulky and expensive filters. The inverter includes an on-board powerful Digital Signal Processor (DSP) that allows easy programmability of the main parameters on the front panel LCD display and keypad.

The SLI50 Series 5kVA inverters can be interfaced with RS485.

Features & Options
48VDC Input
230VAC Output
Compact design: 2U height, 19” rack mountable
Front panel LCD Display Unit to monitor and set main parameters or LED Unit for visual indication available
High efficiency: up to 93%
True sine wave output
RS485 serial link
Input reflected ripple current <150 mArms @ maximum load
Advanced cooling system to optimize fan life and minimize noise
Parallelable output (up to 12 units)
2-position subrack availability

9KVA HOT SWAP INVERTER SYSTEMS – SABRE SERIES 9KVA HOT SWAP INVERTER SYSTEMS – SABRE SERIES

SABRE Series are 3kVA to 9kVA hot swap inverter systems that operate from a 48VDC (40.5-58V range) input and produce either 120VAC or 230VAC nominal output.

The low distortion 50 or 60Hz sine wave is produced using an advanced DSP controlled Architecture which achieve better than 89% efficiency and 10.5VA per cubic inch power density.

SABRE Series pre-configured 3kVA to 9kVA hot swap inverter systems include a Controller and Static Transfer Switch with optional Power Distribution and Maintenance By-Pass facilities.

These 3kVA to 9kVA hot swap inverter systems include remote Communications to a PC is provided USB, RS232 or RS485 serial connections. SNMP alarm traps delivered over an Ethernet TPC/IP connection are also provided as standard.

Features & Options
Hot-Swap Replacement in Shelves
19- or 23-Inch Rack Mounting
120 or 230VAC Output
50 or 60Hz Low Distortion Sine Wave
40.5 to 58 VDC Input
1500 VA Module Output
Scalable to 18kVA
10.5 VA per Cubic Inch Density
Fully Isolated from Battery Input
90% Typical Efficiency
DSP Management & Control
Smart Fan Speed Control
Powers Reactive Loads
Parallel Capable
N+1 Redundant Operation
LED Status Indicators